基于52单片机ISD1760语音芯片的原理图和程序代码。

发布网友发布时间：2022-05-09 00:11

共1个回答

热心网友时间：2024-01-27 18:38

#include <reg51.h>
#define uchar unsigned char
#define uint unsigned int
//******************定义端口******************//
sbit SS = P1^0;
sbit SCK = P1^1;
sbit MOSI = P1^2;
sbit MISO = P1^3;
sbit PR = P1^4;//PLAY = 0;REC = 1;
sbit STOP = P1^5;
sbit AN = P1^6;
sbit LED = P1^7;
//******************定义ISD1700状态寄存器及各标志位******************//
uchar bdata SR0_L;//SR0寄存器低位、高位
uchar bdata SR0_H;
uchar bdata SR1;//SR1寄存器
uchar APC_L = 0, APC_H = 0;//APC寄存器
uchar PLAYADDL = 0, PLAYADDH = 0;//放音指针低位、高位
uchar RECADDL = 0, RECADDH = 0;//录音指针低位、高位

sbit CMD_ERR = SR0_L^0;//SPI指令无效标志位
sbit FULL = SR0_L^1;//芯片存储空间满标志位
sbit PU = SR0_L^2;//上电标志位
sbit EOM = SR0_L^3;//EOM标志位
sbit INT = SR0_L^4;//操作完成标志位
sbit RDY = SR1^0;//芯片空闲标志位
sbit ERASE = SR1^1;//擦除标志位
sbit PLAY = SR1^2;//放音标志位
sbit REC = SR1^3;//录音标志位
//******************定义标志位******************//
uchar bdata fang;
sbit PR_fang = fang^1;//录音、放音标志位，放音=0，录音=1
sbit Erase_fang = fang^4;//擦出标志位
sbit STOP_fang = fang^7;//停止放音标志位
//******************延时μs******************//
void delay(uint time)//延时n微秒
{
while(time!=0)
{
time--;
}
}
//******************延时ms******************//
void delayms(uint time)//延时n毫秒
{
for(time; time>0; time--)
{
TH0 = 0xfc;
TL0 = 0x18;
TR0 = 1;//计数器0启动
while(TF0!=1);//计数溢出处理
TF0 = 0;
TR0 = 0;
}
}
//******************CPU初始化******************//
void cpu_init (void)
{
P1 = 0xFF;
P2 = 0xFF;
P3 = 0xFF;
TMOD = 0x01;//定时器初始化，工作于方式1
EA = 0;//关中断
fang = 0;//标志位归0
LED = 1;//关指示灯
}
//******************发送、读回数据******************//
uchar isd_senddata (uchar dat)
{
uchar i, BUF_ISD = dat;
SS = 0;
SCK = 1;
delay(4);
for(i=0; i<8; i++)
{
SCK = 0;
if((BUF_ISD&0x01)==1)
{
MOSI = 1;
}
else
{
MOSI = 0;
}
BUF_ISD = BUF_ISD >> 1;
if(MISO)
{
BUF_ISD = BUF_ISD|0x80;
}
SCK = 1;
delay(6);
}
MOSI = 0;
return(BUF_ISD);
}
//******************上电******************//
void isd_pu (void)
{
isd_senddata (0x01);
isd_senddata (0x00);
SS = 1;
delayms(50);
}
//******************停止当前操作******************//
void isd_stop (void)
{
isd_senddata (0x02);
isd_senddata (0x00);
SS = 1;
delayms(50);
}
//******************复位******************//
void isd_reset (void)
{
isd_senddata (0x03);
isd_senddata (0x00);
SS = 1;
}
//******************清除中断******************//
void isd_clr_int (void)
{
isd_senddata (0x04);
isd_senddata (0x00);
SS = 1;
}
//******************读状态寄存器内容******************//
void isd_rd_status (void)
{
isd_senddata (0x05);
isd_senddata (0x00);
isd_senddata (0x00);
SS = 1;
delay(2);
SR0_L = isd_senddata (0x05);
SR0_H = isd_senddata (0x00);
SR1 = isd_senddata (0x00);
SS = 1;
}
//******************读放音指针******************//
void isd_rd_playptr (void)
{
isd_senddata (0x06);
isd_senddata (0x00);
isd_senddata (0x00);
isd_senddata (0x00);
SS = 1;
delay(2);
SR0_L = isd_senddata (0x06);
SR0_H = isd_senddata (0x00);
PLAYADDL = isd_senddata (0x00);
PLAYADDH = isd_senddata (0x00);
SS = 1;
}
//******************下电******************//
void isd_pd (void)
{
isd_senddata (0x07);
isd_senddata (0x00);
SS = 1;
delayms(50);
}
//******************读录音指针******************//
void isd_rd_recptr (void)
{
isd_senddata (0x08);
isd_senddata (0x00);
isd_senddata (0x00);
isd_senddata (0x00);
SS = 1;
delay(2);
SR0_L = isd_senddata (0x08);
SR0_H = isd_senddata (0x00);
RECADDL = isd_senddata (0x00);
RECADDH = isd_senddata (0x00);
SS = 1;
}
//******************读芯片ID******************//
uchar isd_devid (uchar deviceNO)
{
isd_senddata (0x09);
isd_senddata (0x00);
isd_senddata (0x00);
SS = 1;
delay(2);
isd_senddata (0x09);
isd_senddata (0x00);
deviceNO = isd_senddata (0x00);
SS = 1;
return(deviceNO);
}
//******************放音******************//
void isd_play (void)
{
isd_senddata (0x40);
isd_senddata (0x00);
SS = 1;
}
//******************录音******************//
void isd_rec (void)
{
isd_senddata (0x41);
isd_senddata (0x00);
SS = 1;
}
//******************擦除******************//
void isd_erase (void)
{
isd_senddata (0x42);
isd_senddata (0x00);
SS = 1;
}
//******************全部擦出******************//
void isd_g_erase (void)
{
isd_senddata (0x43);
isd_senddata (0x00);
SS = 1;
}
//******************读APC寄存器内容******************//
void isd_rd_apc (void)
{
isd_senddata (0x44);
isd_senddata (0x00);
isd_senddata (0x00);
isd_senddata (0x00);
SS = 1;
delay(2);
SR0_L = isd_senddata (0x44);
SR0_H = isd_senddata (0x00);
APC_L = isd_senddata (0x00);
APC_H = isd_senddata (0x00);
SS = 1;
}
//******************写APC寄存器******************//
void isd_wr_apc2 (uchar apcdatl,apcdath)
{
isd_senddata (0x65);
isd_senddata (apcdatl);
isd_senddata (apcdath);
SS = 1;
}
//******************将APC寄存器内容写入NVCFG******************//
void isd_wr_nvcfg (uchar apcdatl,apcdath)
{
isd_senddata (0x46);
isd_senddata (apcdatl);
isd_senddata (apcdath);
SS = 1;
}
//******************将NVCFG内容写入APC******************//
void isd_ld_nvcfg (void)
{
isd_senddata (0x47);
isd_senddata (0x00);
SS = 1;
}
//******************快进******************//
void isd_fwd (void)
{
isd_senddata (0x48);
isd_senddata (0x00);
SS = 1;
}
//******************空检查******************//
void isd_chk_mem (void)
{
isd_senddata (0x49);
isd_senddata (0x00);
SS = 1;
}
//******************外部时钟的启用、关闭******************//
void isd_extclk (void)
{
isd_senddata (0x4a);
isd_senddata (0x00);
SS = 1;
}
//******************指定地址放音******************//
void isd_set_play (uchar saddl,saddh,eaddl,eaddh)
{
isd_senddata (0x80);
isd_senddata (0x00);
isd_senddata (saddl);
isd_senddata (saddh);
isd_senddata (eaddl);
isd_senddata (eaddh);
isd_senddata (0x00);
SS = 1;
}
//******************指定地址录音******************//
void isd_set_rec (uchar saddl,saddh,eaddl,eaddh)
{
isd_senddata (0x81);
isd_senddata (0x00);
isd_senddata (saddl);
isd_senddata (saddh);
isd_senddata (eaddl);
isd_senddata (eaddh);
isd_senddata (0x00);
SS = 1;
}
//******************指定地址擦除******************//
void isd_set_erase (uchar saddl,saddh,eaddl,eaddh)
{
isd_senddata (0x82);
isd_senddata (0x00);
isd_senddata (saddl);
isd_senddata (saddh);
isd_senddata (eaddl);
isd_senddata (eaddh);
isd_senddata (0x00);
SS = 1;
}
//******************芯片系统初始化******************//
void isd_init (void)
{
uchar i = 2;
SS = 1;
SCK = 1;
MOSI = 0;
do
{
isd_pu ();
isd_rd_status ();
}while(CMD_ERR||(!PU));
isd_wr_apc2 (0x40,0x04);
do
{
isd_rd_status ();
}while(RDY==0);
do
{
LED = 0;
delayms(300);
LED = 1;
delayms(300);
i--;
}while(i>0);
}
//******************isd1700的相关操作******************//
void isdwork (void)
{
uchar i;
switch (fang)
{
case 0x00:
{
do
{
isd_rd_status ();
}while(RDY==0);
delayms(10);
isd_play ();
delayms(2);
LED = 0;
do
{
isd_rd_status ();
if(STOP==0)
{
delayms (10);
if(STOP==0)
{
LED = 1;
isd_clr_int ();
isd_stop ();
isd_reset ();
isd_pd ();
isd_init ();
return;
}
}
}while(PLAY==1);
LED = 1;
isd_clr_int ();
do
{
isd_rd_status ();
}while(RDY==0);
delayms (10);
isd_fwd ();
do
{
isd_rd_status ();
}while(RDY==0);
}
break;
case 0x02:
{
isd_clr_int ();
do
{
isd_rd_status ();
}while(RDY==0);
delayms(10);
isd_rec ();
delayms(2);
LED = 0;
do
{
isd_rd_status ();
if(FULL==1)
{
for(i=3; i>0; i--)
{
LED = 0;
delayms (300);
LED = 1;
delayms (200);
}
}
}while(AN==0);
isd_clr_int ();
isd_stop ();
LED = 1;
}
break;
case 0x10:
{
do
{
isd_rd_status ();
}while(RDY==0);
delayms (10);
isd_g_erase ();
delayms (2);
do
{
isd_rd_status ();
}while(RDY==0);
for(i=3; i>0; i--)
{
LED = 0;
delayms (300);
LED = 1;
delayms (200);
}
}
break;
case 0x80:
{
isd_clr_int ();
isd_stop ();
isd_reset ();
isd_pd ();
}
break;
}
}
//******************主程序******************//
void main (void)
{
uchar i;
cpu_init ();
delayms (1);
isd_init ();
while(1)
{
if(AN==0)
{
delayms (10);
if(AN==0)
{
if(PR==1)
{
PR_fang = 1;
}
else
{
PR_fang = 0;
}
isdwork ();
}
}
if(STOP==0)
{
delayms (10);
if(STOP==0)
{
for(i=100; i>0; i--)
{
if(STOP==1)
{
STOP_fang = 1;
isdwork ();
isd_init ();
break;
}
delayms(30);
}
if (STOP_fang==1)
{
fang = 0;
continue;
}
Erase_fang = 1;
isdwork ();
}
}
}
}
这个是按键录放的例程，你可以根据这个例程自己修改一下追问算了，本来也不报太大期望，你的这个我已经有在网上找到了；硬件原理图设计我就参考isd1760基本中文资料就好了！