如下拓扑结构图，写出各路由器与交换机的配置，使所有的计算机之间可以正常通信，请使用 EIGRP路由协议
发布网友
发布时间：2022-05-19 05:33
共1个回答
热心网友
时间：2024-03-04 23:46
配置如下 ，这个很简单，翻翻CCNA看三天就会了。
——————————————————————————
路由器配置：
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface f0/1
Router(config-if)#no shutdown
Router(config-if)#ip add 172.16.5.1 255.255.255.0
Router(config-if)#ip nat outside
Router(config-if)#exit
Router(config)#interface f0/0
Router(config-if)#no shutdown
Router(config-if)#ip address 172.16.4.2 255.255.255.0
Router(config-if)#ip nat inside
Router(config-if)#description -------LAN
Router(config-if)#exit
Router(config)#do wr
Building configuration...
[OK]
Router(config)#access-list 1 permit 172.16.0.0 0.0.255.255
Router(config)#ip nat inside source list 1 interface f0/1 overload
Router(config)#router eigrp 10
Router(config-router)#network 172.16.5.0 0.0.0.255
Router(config-router)#network 172.16.4.0 0.0.0.255
Router(config-router)#exit
Router(config)#do wr
Building configuration...
[OK]
Router(config)#hostname R1
R1(config)#do wr
Building configuration...
RCHANGE: IP-EIGRP 10: Neighbor 172.16.4.1 (FastEthernet0/0) is up: new adjacency
%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.16.4.1 (FastEthernet0/0) is resync: graceful restart
R1(config)#router eigrp 10
R1(config-router)#no auto-summary
————————————————————
三层3560配置：
SW3#show run
Building configuration...
Current configuration : 1792 bytes
hostname SW3
ip dhcp excluded-address 172.16.2.1
ip dhcp excluded-address 172.16.3.1
ip dhcp pool 10
network 172.16.2.0 255.255.255.0
default-router 172.16.2.1
dns-server 202.103.24.68
ip dhcp pool 20
network 172.16.3.0 255.255.255.0
default-router 172.16.3.1
dns-server 202.103.24.68
ip routing
spanning-tree mode pvst
interface FastEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
interface FastEthernet0/2
switchport access vlan 2
interface Vlan1
no ip address
shutdown
!
interface Vlan2
ip address 172.16.4.1 255.255.255.0
!
interface Vlan10
ip address 172.16.2.1 255.255.255.0
!
interface Vlan20
ip address 172.16.3.1 255.255.255.0
!
router eigrp 10
network 172.16.4.0 0.0.0.255
network 172.16.2.0 0.0.0.255
network 172.16.3.0 0.0.0.255
no auto-summary
————————————————————
两个2层交换机 2950配置；
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname SW2
SW2(config)#interface f0/3
SW2(config-if)#switchport mode trunk
SW2(config-if)#switchport trunk allowed vlan all
SW2(config-if)#exit
SW2(config)#vtp mode client
Setting device to VTP CLIENT mode.
SW2(config)#vtp domain bd
Domain name already set to bd.
SW2(config)#vtp pa
SW2(config)#vtp password bd
Setting device VLAN database password to bd
SW2(config)#interface f0/1
SW2(config-if)#switchport mode access
SW2(config-if)#switchport access vlan 10
SW2(config-if)#exit
SW2(config)#interface f0/2
SW2(config-if)#switchport mode a
SW2(config-if)#switchport mode access
SW2(config-if)#switchport access vlan 20
SW2(config-if)#exit
SW2(config)#ip default-gateway 172.16.4.1
SW2(config)#interface f0/24
SW2(config-if)#switchport mode trunk
SW2(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to up
SW2(config-if)#switchport trunk allowed vlan all
SW2(config-if)#exit
————————————————————
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname SW1
SW1(config)#interface f0/24
SW1(config-if)#switchport mode trunk
SW1(config-if)#switchport trunk allowed vlan all
SW1(config-if)#exit
SW1(config)#vtp mode client
SW1(config)#vtp domain bd
Domain name already set to bd.
SW1(config)#vtp password bd
Setting device VLAN database password to bd
SW1(config)#interface f0/1
SW1(config-if)#switchport mode access vlan 10
^
% Invalid input detected at '^' marker.
SW1(config-if)#switchport mode access
SW1(config-if)#switchport access vlan 10
SW1(config-if)#exit
SW1(config)#interface f0/2
SW1(config-if)#switchport mode access
SW1(config-if)#switchport access vlan 20
SW1(config)#ip default-gateway 172.16.4.1
SW1(config)#do wr
