如何使ADB在Linux下支持Android设备的udev规则配置

发布网友发布时间：2022-04-20 13:03

共1个回答

热心网友时间：2023-10-15 09:17

　　1.Connect Andriod device to your Linux ***.
　　2.Use "lsusb".
Use lsusb to check the Android device ID in usb subsystem, like below (do not care "$"):
$ lsusb
Bus 001 Device 002: ID 0fce:6156 Sony Ericsson Mobile
Number "0fce" is the Andriod device ID in use subsystem.
　　3.Update adb tool.
Turn to Android sdk folder "tools", typein below words:
$./android adb update
it's neccesary step to create ~/.android/adb_usb.ini.
　　4. Edit adb_usb.ini .
Edit ~/.android/adb_usb.ini. Add usb subsystem ID to adb_usb.ini, like below:
　　0x0fec
　　5.Create udev rule file.
Create a new file named "sony-android.rules" in /etc/udev/rules.d folder.
　　Add below content to "sony-android.rules"
SUBSYSTEM=="usb", SYSFS{idVendor}=="0fec", MODE="0666"
idVendor USB Vendor IDs, reference:
　　chmod rule file:
　　sudo chmod a+rx /etc/udev/rules.d/sony-android.rules
　　6.Restart udev service.
Do as below to restart udev service:
$ sudo service udev restart
　　7.Restart adb service.
Do as below to restart adb service.
$ adb kill-server
$ adb start-server
　　8.Try "adb devices".
　　Plug out Adnroid device, then, Plug in again, use "adb devices" to check your Andriod device.