android2.3系统laaboo手机recovery模式怎么选择
发布网友
发布时间：2022-10-19 01:58
共3个回答
热心网友
时间：2024-11-17 08:21
bootable/recovery 下的源代码编译生成。头文件 bootable/recovery/recovery_ui.h 定义了 Recovery UI
的接口，bootable/recovery/default_recovery_ui.c 是其默认实现，每个设备可以有自己不同的实现，然后通过变量
TARGET_RECOVERY_UI_LIB 来指定，否则使用默认实现。
# bootable/recovery/Android.mk
ifeq ($(TARGET_RECOVERY_UI_LIB),)
LOCAL_SRC_FILES + = default_recovery_ui.c
else
LOCAL_STATIC_LIBRARIES + = $(TARGET_RECOVERY_UI_LIB)
endif
Recovery Image：
Recovery Image 的生成规则在文件 build/core/Makefile 中定义，具体分析如下：
# build/core/Makefile
# -----------------------------------------------------------------
# Recovery image
# If neither TARGET_NO_KERNEL nor TARGET_NO_RECOVERY are true
ifeq (,$(filter true, $(TARGET_NO_KERNEL) $(TARGET_NO_RECOVERY)
$(BUILD_TINY_ANDROID)))
INSTALLED_RECOVERYIMAGE_TARGET := $(PRODUCT_OUT)/recovery.img
recovery_initrc := $(call include-path-for, recovery)/etc/init.rc
recovery_kernel := $(INSTALLED_KERNEL_TARGET) # same as a non-recovery
system
recovery_ramdisk := $(PRODUCT_OUT)/ramdisk-recovery.img
recovery_build_prop := $(INSTALLED_BUILD_PROP_TARGET)
recovery_binary := $(call
intermediates-dir-for,EXECUTABLES,recovery)/recovery
recovery_resources_common := $(call include-path-for, recovery)/res
recovery_resources_private := $(strip
$(wildcard$(TARGET_DEVICE_DIR)/recovery/res))
recovery_resource_deps := $(shell find $(recovery_resources_common) \
$(recovery_resources_private) -type f)
recovery_fstab := $(strip $(wildcard
$(TARGET_DEVICE_DIR)/recovery.fstab))
recovery_mmc_fstab := $(strip
$(wildcard$(TARGET_DEVICE_DIR)/recovery_mmc.fstab))
ifeq ($(recovery_resources_private),)
$(info No private recovery resources for TARGET_DEVICE
$(TARGET_DEVICE))
endif
ifeq ($(recovery_fstab),)
$(info No recovery.fstab for TARGET_DEVICE $(TARGET_DEVICE))
endif
INTERNAL_RECOVERYIMAGE_ARGS := \
$(addprefix --second ,$(INSTALLED_2NDBOOTLOADER_TARGET)) \
--kernel $(recovery_kernel) \
--ramdisk $(recovery_ramdisk)
# Assumes this has already been stripped
ifdef BOARD_KERNEL_CMDLINE
INTERNAL_RECOVERYIMAGE_ARGS += --cmdline "$(BOARD_KERNEL_CMDLINE)"
endif
ifdef BOARD_KERNEL_BASE
INTERNAL_RECOVERYIMAGE_ARGS += --base $(BOARD_KERNEL_BASE)
endif
BOARD_KERNEL_PAGESIZE := $(strip $(BOARD_KERNEL_PAGESIZE))
ifdef BOARD_KERNEL_PAGESIZE
INTERNAL_RECOVERYIMAGE_ARGS += --pagesize $(BOARD_KERNEL_PAGESIZE)
endif
INSTALLED_BOOTIMAGE_TARGET := $(PRODUCT_OUT)/boot.img
kernel: $(INSTALLED_BOOTIMAGE_TARGET)
.PHONY: kernel
# Keys authorized to sign OTA packages this build will accept. The
# build always uses test-keys for this; release packaging tools will
# substitute other keys for this one.
OTA_PUBLIC_KEYS := $(SRC_TARGET_DIR)/proct/security/testkey.x509.pem
# Generate a file containing the keys that will be read by the
# recovery binary.
RECOVERY_INSTALL_OTA_KEYS := \
$(call intermediates-dir-for,PACKAGING,ota_keys)/keys
DUMPKEY_JAR := $(HOST_OUT_JAVA_LIBRARIES)/mpkey.jar
$(RECOVERY_INSTALL_OTA_KEYS): PRIVATE_OTA_PUBLIC_KEYS :=
$(OTA_PUBLIC_KEYS)
$(RECOVERY_INSTALL_OTA_KEYS): $(OTA_PUBLIC_KEYS) $(DUMPKEY_JAR)
@echo "DumpPublicKey: $@ <= $(PRIVATE_OTA_PUBLIC_KEYS)"
@rm -rf $@
@mkdir -p $(dir $@)
java -jar $(DUMPKEY_JAR) $(PRIVATE_OTA_PUBLIC_KEYS) > $@
$(INSTALLED_RECOVERYIMAGE_TARGET): $(MKBOOTFS) $(MKBOOTIMG) $(MINIGZIP)
\
$(INSTALLED_RAMDISK_TARGET) \
$(INSTALLED_BOOTIMAGE_TARGET) \
$(recovery_binary) \
$(recovery_initrc) $(recovery_kernel) \
$(INSTALLED_2NDBOOTLOADER_TARGET) \
$(recovery_build_prop) $(recovery_resource_deps) \
$(recovery_fstab) \
$(RECOVERY_INSTALL_OTA_KEYS)
/* 以正常系统的根文件系统为基础构建 Recovery 的根文件系统 */
@echo ----- Making recovery image ------
rm -rf $(TARGET_RECOVERY_OUT)
mkdir -p $(TARGET_RECOVERY_OUT)
mkdir -p $(TARGET_RECOVERY_ROOT_OUT)
mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/etc
mkdir -p $(TARGET_RECOVERY_ROOT_OUT)/tmp
echo Copying baseline ramdisk...
cp -R $(TARGET_ROOT_OUT) $(TARGET_RECOVERY_OUT)
/* 删除所有的 Init 脚本，使用 Recovery 特定的 Init 脚本 */
rm $(TARGET_RECOVERY_ROOT_OUT)/init*.rc
echo Modifying ramdisk contents...
cp -f $(recovery_initrc) $(TARGET_RECOVERY_ROOT_OUT)/
/* 添加 Recovery Binary */
cp -f $(recovery_binary) $(TARGET_RECOVERY_ROOT_OUT)/sbin/
/* 添加通用的和设备特定的 Recovery 资源 */
cp -rf $(recovery_resources_common) $(TARGET_RECOVERY_ROOT_OUT)/
$(foreach item,$(recovery_resources_private), \
cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/)
/* 添加设备特定的文件系统表 */
$(foreach item,$(recovery_fstab), \
cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.fstab)
$(foreach item,$(recovery_mmc_fstab), \
cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery_mmc.fstab)
/* 内嵌验证签名的公钥 */
cp $(RECOVERY_INSTALL_OTA_KEYS) $(TARGET_RECOVERY_ROOT_OUT)/res/keys
/* 生成 Recovery 模式的默认属性文件 */
cat $(INSTALLED_DEFAULT_PROP_TARGET) $(recovery_build_prop) \
> $(TARGET_RECOVERY_ROOT_OUT)/default.prop
/* 生成 Recovery 的根文件系统 ramdisk-recovery.img */
$(MKBOOTFS) $(TARGET_RECOVERY_ROOT_OUT) | $(MINIGZIP) >
$(recovery_ramdisk)
/* 把正常系统的内核跟 ramdisk-recovery.img 打包生成 Recovery Image */
$(MKBOOTIMG) $(INTERNAL_RECOVERYIMAGE_ARGS) --output $@
@echo ----- Made recovery image -------- $@
/* 验证生成的 Recovery Image 有没有超出 Recovery 分区的大小 */
$(hide) $(call
assert-max-image-size,$@,$(BOARD_RECOVERYIMAGE_PARTITION_SIZE),raw)
else
INSTALLED_RECOVERYIMAGE_TARGET :=
endif
.PHONY: recoveryimage
recoveryimage: $(INSTALLED_RECOVERYIMAGE_TARGET)
Recovery Init Script：
从上面的分析可以看出 recovery.img 和 boot.img 的区别不大，主要是 init 脚本不一样，recovery 的 init
脚本相对简单，系统起来后只运行 ueventd、recovery、adbd 三个服务。
# bootable/recovery/etc/init.rc
on early-init
start ueventd
on init
export PATH /sbin
export ANDROID_ROOT /system
export ANDROID_DATA /data
export EXTERNAL_STORAGE /sdcard
symlink /system/etc /etc
mkdir /sdcard
mkdir /system
mkdir /data
mkdir /cache
mount /tmp /tmp tmpfs
on boot
ifup lo
hostname localhost
domainname localdomain
class_start default
service ueventd /sbin/ueventd
critical
service recovery /sbin/recovery
service adbd /sbin/adbd recovery
disabled
on property:persist.service.adb.enable=1
start adbd
on property:persist.service.adb.enable=0
stop adbd
Android <----> Recovery Binary <----> Bootloader：
有时候 Android 需要不同的模式互相协助来完成一项任务，这样不同模式之间就要有一种机制来交换信息。Recovery Binary 和
Bootloader 之间是通过 misc 分区来传递信息的，如果是 MTD 设备，则使用 misc 分区的第二个页面，如果是块设备，则使用 misc
分区的第一块，交换的信息通过如下结构体封装。Recovery Binary 和 Android 之间是通过 cache
分区下的如下几个固定文件来传递信息的。
/* Recovery Binary <----> Bootloader */
struct bootloader_message {
char command[ 32];
char status[ 32];
char recovery[ 1024];
};
/* Recovery Binary <----> Android */
/cache/recovery/command
/cache/recovery/intent
/cache/recovery/log
/cache/recovery/last_log
Updater Binary：
Updater Binary 是 OTA package 的安装程序，被打包到 OTA package 中一起发布。Updater Binary
的源代码位于目录 bootable/recovery/updater 中。每个设备都可以为 Updater Binary
添加自己特定的扩展，然后通过变量TARGET_RECOVERY_UPDATER_LIBS 和
TARGET_RECOVERY_UPDATER_EXTRA_LIBS 来指定。
# bootable/recovery/updater/Android.mk
LOCAL_STATIC_LIBRARIES += $(TARGET_RECOVERY_UPDATER_LIBS) \
$(TARGET_RECOVERY_UPDATER_EXTRA_LIBS)
LOCAL_STATIC_LIBRARIES + = libapplypatch libedify libmttils libminzip
libz
LOCAL_STATIC_LIBRARIES + = libmincrypt libbz
LOCAL_STATIC_LIBRARIES + = libcutils libstdc++ libc
LOCAL_C_INCLUDES + = $(LOCAL_PATH)/..
# Each library in TARGET_RECOVERY_UPDATER_LIBS should have a function
# named "Register_()". Here we emit a little C function that
# gets #included by updater.c. It calls all those registration
# functions.
# Devices can also add libraries to TARGET_RECOVERY_UPDATER_EXTRA_LIBS.
# These libs are also linked in with updater, but we don't try to call
# any sort of registration function for these. Use this variable for
# any subsidiary static libraries required for your registered
# extension libs.
inc := $(call
intermediates-dir-for,PACKAGING,updater_extensions)/register.inc
# During the first pass of reading the makefiles, we mp the list of
# extension libs to a temp file, then copy that to the ".list" file if
# it is different than the existing .list (if any). The register.inc
# file then uses the .list as a prerequisite, so it is only rebuilt
# (and updater.o recompiled) when the list of extension libs changes.
junk := $(shell mkdir -p $(dir $(inc));\
echo $(TARGET_RECOVERY_UPDATER_LIBS) > $(inc).temp;\
diff -q $(inc).temp $(inc).list || cp -f $(inc).temp $(inc).list)
$(inc) : libs := $(TARGET_RECOVERY_UPDATER_LIBS)
$(inc) : $(inc).list
$(hide) mkdir -p $(dir $@)
$(hide) echo "" > $@
$(hide) $(foreach lib,$(libs),echo "extern void Register_$(lib)(void);"
>> $@)
$(hide) echo "void RegisterDeviceExtensions() {" >> $@
$(hide) $(foreach lib,$(libs),echo " Register_$(lib)();" >> $@)
$(hide) echo "}" >> $@
$(call intermediates-dir-for,EXECUTABLES,updater)/updater.o : $(inc)
LOCAL_C_INCLUDES += $(dir $(inc))
热心网友
时间：2024-11-17 08:22
2 按主屏幕建（即home键）+音量上键+电源键
3 待屏幕有显示时 松开电源键 保持按住主屏幕键+音量上键
4 待进入recovery后全部松开
进入后 音量加减 控制上下 电源键是确定
热心网友
时间：2024-11-17 08:22
关机+音量下
关机+音量上和音量下
menu键+音量上
menu键+音量下
menu键+音量上和音量下
总有一个是的，挨个试试吧。
