英文说明书(翻译急用)高分
发布网友
发布时间：2022-05-14 17:27
共5个回答
热心网友
时间：2023-10-16 13:20
Before this test must see brochures, to understand the structure of local, familiar with the operation of the role and use.
Note the starter, and then good power, a starter on, check the electrical functioning of the direction is correct.
Wang Li to manually push valve handle, up to the plate at this time, Wang Waila handle, clips decline.
Help
On a switch to start the motor, the valve handle manually pushed Wang Li, making clips Shangtai, and then handle the middle pulled free to stop, opened the door to lay the wire bundles, good customs gate, and the top side of good.
, With Da Baoji to expect on the plane, Wang Waila manual valve handle, clips dropped compaction of materials, will handle clips Wang Li pushed up, and then loading, repeat the above operation to package the size just as high.
Top-side door open, people standing by the side of the iron pipe Qiaokai Men, and win the first wire guitar, with Irons forced to pack.
Valve handle manually increase or decrease after the action must be free to return to the middle position, otherwise clips may decline and dangerous.
Each change clips up and down, the valve must be manually stopped the free position, is prohibited Skip free to operate, or may cause damage to the pump.
This machine in operation, such as tripping, should first identify the reasons for, such as 10 minutes before the start, if forced to start, will start burning and motor-coils.
In loading, the materials should be placed formation, so as to avoid clips under the oil-oriented deformation.
By packing materials must be fully Add to machines, can not be dragged to overflow on the door, otherwise the damage would lead to machines.
Each increased or decreased, the hydraulic rod should have a certain cushion, so as not to打完This is very advantageous to protect the hydraulic rod.
On a starter, action should be fast. Each time from work or to starter when the power failure cut off.
Cause of the malfunction and ruled out:
Maintenance, service
Not three months to replace a hydraulic oil, and cleaning the fuel tank and fuel tank of oil filters. The summer with (the Kunlun licensing) 68 # hydraulic oil, used in winter (Kunlun licensing) 36 # hydraulic oil.
Regular replacement整机seals (generally once a year).
Protect the orientation of the hydraulic rod to prevent the collision hair, chemical corrosion, often in the direction rod joined lubricants.
Even a half-yearly replacement shaft for flexible plastic ring to check for any damage even the axis, should be replaced.
Motor bearings should be refueled once every six months.
10. Three Guarantees:
The factory proction of hydraulic machinery, the warranty to three months, every one of the conditions to be collected materials.
Not to use the instructions of the damage caused.
Proct quality problems are not caused damage.
Switching the warranty to three months, the electrical three months.
Overload led to the long-term damage.
Changes lead to damage to the factory settings.
As packaging materials placed at the formation caused no damage.
As transportation, get off on the damage caused.
参考资料：google翻译
热心网友
时间：2023-10-16 13:20
Before this test must see brochures, to understand the structure of local, familiar with the operation of the role and use.
Note the starter, then good power, a starter on, check the electrical functioning of the direction is correct.
Wang Li to manually push valve handle, then clips to the increase in Wangwai La handle, clips decline.
Help
On a switch to start the motor, the valve handle manually pushed Wang Li, making clips Shangtai, and then handle the middle pulled free to stop, opened the door to lay the wire bundles, good customs gate, and the top side of good.
Da Baoji to expect on the plane, loaded, manual valve handle Wang Waila, clips dropped compaction of materials, will handle clips Wang Li pushed up, and then loading, repeat the above operation to package the size just as high.
Top-side door open, people standing by the side of the iron pipe Qiaokai Men, and win the first wire guitar, with Irons forced to pack.
Valve handle manually increase or decrease after the action must be free to return to the middle position, otherwise clips may decline and dangerous.
Each change clips up and down, the valve must be manually stopped the free position, is prohibited Skip free to operate, or may cause damage to the pump.
This machine in operation, such as tripping, should first identify the reasons for, such as 10 minutes before the start, if forced to start, will start burning and motor-coils.
In loading, the materials should be placed formation, so as to avoid clips under the oil-oriented deformation.
By packing materials must be fully Add to machines, can not be dragged to overflow on the door, otherwise the damage would lead to machines.
Each increased or decreased, the hydraulic rod should have a certain cushion, so as not to打完, which is very advantageous to protect the hydraulic rod.
On a starter, action should be fast. Each time from work or when the blackout should be cut off starter.
Cause of the malfunction and ruled out:
Maintenance, service
Not three months to replace a hydraulic oil, and cleaning the fuel tank and fuel tank of oil filters. The summer with (the Kunlun licensing) 68 # hydraulic oil, used in winter (Kunlun licensing) 36 # hydraulic oil.
Regular replacement整机seals (General once a year).
Protect the orientation of the hydraulic rod to prevent the collision hair, chemical corrosion, often in the direction rod joined lubricants.
Even a half-yearly replacement shaft for flexible plastic ring to check for any damage even the axis, should be replaced.
Motor bearings should be refueled once every six months.
10. Three Guarantees:
The factory proction of hydraulic machinery, the warranty to three months, every one of the cases will be charged the cost of materials.
Not to use the instructions of the damage caused.
Proct quality problems are not caused damage.
Switching the warranty to three months, the electrical three months.
Overload led to the long-term damage.
Changes lead to damage to the factory settings.
As packaging materials placed at the formation caused no damage.
As transportation, get off on the damage caused.
热心网友
时间：2023-10-16 13:20
Before this test must see brochures, to understand the structure of local, familiar with the operation of the role and use.
Note the starter, then good power, a starter on, check the electrical functioning of the direction is correct.
Wang Li to manually push valve handle, up to the plate at this time, Wang Waila handle, clips decline.
Help
On a switch to start the motor, the valve handle manually pushed Wang Li, making clips Shangtai, and then handle the middle pulled free to stop, opened the door to lay the wire bundles, good customs gate, and the top side of good.
Da Baoji to expect on the plane, loaded, manual valve handle Wang Waila, clips dropped compaction of materials, will handle clips Wang Li pushed up, and then loading, repeat the above operation to package the size just as high.
Top-side door open, people standing by the side of the iron pipe Qiaokai Men, and win the first wire guitar, with Irons forced to pack.
Valve handle manually increase or decrease after the action must be free to return to the middle position, otherwise clips may decline and dangerous.
Each change clips up and down, the valve must be manually stopped the free position, is prohibited Skip free to operate, or may cause damage to the pump.
This machine in operation, such as tripping, should first identify the reasons for, such as 10 minutes before the start, if forced to start, will start burning and motor-coils.
In loading, the materials should be placed formation, so as to avoid clips under the oil-oriented deformation.
By packing materials must be fully Add to machines, can not be dragged to overflow on the door, otherwise the damage would lead to machines.
Each increased or decreased, the hydraulic rod should have a certain cushion, so as not to打完, which is very advantageous to protect the hydraulic rod.
On a starter, action should be fast. Each time from work or to starter when the power failure cut off.
Cause of the malfunction and ruled out:
Maintenance, service
Not three months to replace a hydraulic oil, and cleaning the fuel tank and fuel tank of oil filters. The summer with (the Kunlun licensing) 68 # hydraulic oil, used in winter (Kunlun licensing) 36 # hydraulic oil.
Regular replacement整机seals (generally once a year).
Protect the orientation of the hydraulic rod to prevent the collision hair, chemical corrosion, often in the direction rod joined lubricants.
Even a half-yearly replacement shaft for flexible plastic ring to check for any damage even the axis, should be replaced.
Motor bearings should be refueled once every six months.
10. Three Guarantees:
The factory proction of hydraulic machinery, the warranty to three months, every one of the cases will be charged the cost of materials.
Not to use the instructions of the damage caused.
Proct quality problems are not caused damage.
Switching the warranty to three months, the electrical three months.
Overload led to the long-term damage.
Changes lead to damage to the factory settings.
As packaging materials placed at the formation caused no damage.
As transportation, get off on the damage caused.
热心网友
时间：2023-10-16 13:21
The operation showed that closes the switch, the starting dynamo, pushes the hand operated valve handle toward, causes on the clamp to lift, pulls again the handle to the middle neutral gear stops, opening the iron wire which the gate shop good pack uses, Guan Haomen, and a side gate is excellent. feeds toward the baler to on plane, the hand operated valve handle toward the external bracing, the clamp drops the compaction material, rises the handle toward in thrust plate, recharges, the rendant above operates to a package of high size just up. turns on the side gate roof ornament, the human stands in the side beats open the doorknob with the iron pipe, hits the iron wire to tie the head, picks up the package with the iron rod. after the hand operated valve handle rises or the down maneuver, certainly must return to the middle neutral gear position, otherwise the clamp possibly slides has the danger. when each time changes the clamp above-below direction, the hand operated valve must stop in the neutral gear position, refuses the jump neutral gear to carry on the operation, otherwise possibly causes pump's damage.
the this aircraft in the movement, like the trip, should verify the reason first, and so on 10 minutes later only then starts, if forces to start, will burn down starter's coil and the electric motor. when feeding, should be as far as possible smooth the material laying aside, in order to avoid causes the clamp oil pole steering bar's distortion. packs the material must put in completely within the aircraft, cannot tow overflows to the shutter on, will otherwise cause machine's damage. when each time rises or the drop, the oil strut bracing should leave leeway certain remainder, do not fire off as far as possible, this to protects the oil strut bracing to have the advantage very much. when closes the starter, the movement should be quick. Each time gets off work or when the power cut must the starter cut-off. breakdown reason and elimination method: the maintenance, maintains the three months please not to replace the hydraulic fluid one time, and cleans in the fuel tank and fuel tank's oil filter. In the summer with (the Kunlun Mountains sign) the 68# hydraulic fluid, uses (the Kunlun Mountains sign) in the winter the 36# hydraulic fluid. regular replacement complete machine seal (generally once a year). protects the good guidance with the oil strut bracing, prevents to bump the wool, the chemical etching and so on, joins the lubricating oil frequently on the steering bar. replaces the junction box every half year the elastic rubber link, the inspection junction box like has the damage, should replace. the electrical machinery's bearing should refuel every half year one time. 10.3 packages of explanations: the this factory proction's hydraulic machinery, maintains for three months, whatever belongs one of situations will charge the materials expenses. does not cause the damage according to the operating instructions operation. is not the proct quality question causes the damage. the switch maintains for three months, the electrical machinery three months. the long-term excess load causes the damage. the change leaving the plant establishment causes the damage. because packs time the material laying aside is not smooth causes the damage. because transports, on gets out to cause the damage.
热心网友
时间：2023-10-16 13:22
可以了吧...辛苦啊....
